HOW TO FIX 0X8024001F WINDOWS UPDATE ERROR?

When you try to update your Windows from the Windows Update, then the procedure can be restricted due to a handful of errors. One such error is the error code 0x8024001F and it reboots your PC while you try to install the updates. Here are the instructions to fix the issue.

Launch Windows Update Troubleshooter

  • Go to the Control Panel and launch it on your system.
  • After that, click on the Troubleshooting option.
  • You should select the Advanced option from the ‘Windows update troubleshooter.’
  • Reach the ‘Run as administrator’ and click on the Next option.
  • You have to wait till complete the scan.
  • In case a viable solution is detected, you will view a fresh screen that will pop-up you to the ‘Apply this fix’ whether a suggested strategy is detected.
  • Now, allow the procedure to complete and reboot the system.

Uninstall or Turn off Third-Party Firewall or Antivirus

In case you intend to uninstall or turn off a third-party firewall or antivirus, then you can opt to follow the below-mentioned guidelines.

  • Hold the Win + R keys at the same time on your system to launch the Run section.
  • After that, input ‘appwiz.cpl’ in it and hit the Enter key.
  • Also, you should launch the Control Panel click on the Programs and Features.
  • You will see an installed programs list on your system.
  • Then click on the program that you would like to uninstall and right-click on it.
  • Select the Uninstall button.
  • You have to pursue the on-screen instructions to uninstall the software.
  • Now, reboot the system to apply the changes.

Run SFC

If the users are trying to run SFC, then they should carefully apply the given steps.

  • Hold the Win + R keys at the same time on your system to launch the Run section.
  • After that, input ‘cmd’ into it and hit Enter key to launch the Enter key or hold the ‘Control + Shift + Esc’ keys at the same time on your system.
  • In case of the pop-up, select the Yes button to launch with raised privileges.
  • You should perform the DISM utility when you are opening SFC.
  • Then input the pursuing commands and hit the Enter key:
  • Dism.exe /online /cleanup-image /scanhealth
  • Dism.exe /online /cleanup-image /restorehealth
  • After completing the DISM scan, reboot the system.
  • Now, you should input the next command then hit the Enter key to start the SFC scan: ‘sfc /scannow.’
  • You have to wait sometime to finish the command operation.
  • Thereafter, reboot the system once more and check whether the 0x8024001F error of Windows update is still shown in the next PC startup.

Restore Windows Update Service

In case you intend to restore Windows update services, then you can opt to follow the below-mentioned guidelines.

  • You should begin the process by starting up into the system with full rights of administrative.
  • Hold the Win + R keys at the same time on your system to launch the Run section.
  • After loading the Services, then reach the Windows Update and right-click on it.
  • Now, reboot the system.

Source  :-  https://vmsoffice.com/how-to-fix-0x8024001f-windows-update-error/

HOW TO FIX ATIKMDAG SYS BSOD ERRORS ON WINDOWS 10?

Error codes are always annoying, but the level of frustration rise up a notch when they are accompanied with a BSOD. There are an abundance of blue screen errors you can face on Windows, and one of them is Atikmdag.sys. The error mostly arises after a system update, and here is how it can be fixed:

Launch Full System Scan

  • Navigate to the Windows Start on your system.
  • After that, input ‘defender’ into it and hit the Enter key.
  • You should reach the Windows Defender and twice click on it to open the utility.
  • Go to the left-hand side panel and click on the shield button.
  • Reach the new screen and select the option of an Advanced scan.
  • Now, tick the option of a Full scan to open the full system malware.

Fix System Registry 

If the users are trying to fix the system registry, then they should carefully apply the given steps.

  • Navigate to the Windows logo on your system.
  • Thereafter, input ‘cmd’ into it and hit the Enter key to launch the Command Prompt.
  • You should click on the ‘Run as Administrator.’
  • Then input ‘sfc /scannow’ into it and hit the Enter button.
  • Now, you have to wait for the procedure of scanning to finish and reboot the system.

Upgrade the Windows Operating System

In case you intend to upgrade the Windows operating system, then you can opt to follow the below-mentioned guidelines.

  • Navigate to the Windows logo on your system.
  • After that, input ‘update’ into it and hit the Enter key to launch the Windows Update.
  • You should reach the screen of Windows Update, look for updates and install the applicable updates.
  • Now, once finish the update, reboot the system.

Upgrade ATI Radeon Drivers

If the users are trying to upgrade ATI Radeon drivers, then they should carefully apply the given steps.

  • Hold the Win +R keys at the same time on your system to launch the Run section.
  • After that, input ‘devmgmt.msc’ into it and hit the Enter key to launch the Device Manager.
  • Go to the left-hand side panel of Device Manager and extend the category of Display adapters.
  • Then reach the video card and right-click on it.
  • You should click on the Device Manager then purse the pops-up to save the update.
  • Now, upgrading the video driver on the system, reboot the system.

Run System Restore in Safe Mode

In case you intend to run the system restore in safe mode, then you can opt to follow the below-mentioned guidelines.

  • First of all, you have to turn off your system and switch on it once again.
  • After that, go to the option of ‘Run in Safe Mode’ then press the Enter key.
  • You should reach the Start button, and input ‘system restore’ then press the Enter button.
  • Then pursue the pops-up to get back to a firm restore point.
  • Now, you have to wait for the procedure to finish then reboot the system.

Perform Chkdsk

If the users are trying to perform chkdsk, then they should carefully apply the given steps.

  • Go to the ‘Windows bootable installation DVD’ and boot it on your system.
  • Once pop-up, hit any button to boot from DVD or CD.
  • You should click on the language preferences, select the Next button.
  • Navigate to the ‘repair your computer’ option.
  • You should select the Troubleshoot option and choose the Advanced tab.
  • Go to the Command Prompt option.
  • Reach the Command Prompt and input ‘CHKDSK C: /F’ without quotes.
  • You have to enter ‘CHKDSK C: /R’ into it and press the Enter button.
  • Now, once finish the procedure, reboot the system.

Reinstall Windows 10

The user can reinstalling Windows 10, but they should first make a backup of the data. Reinstalling the OS would most certainly fix the error and your system will start running as usual.

Source  :-  https://rawebroot.com/how-to-fix-atikmdag-sys-bsod-errors-on-windows-10/

 

How to Fix 0x80070422 Windows 10 Update Error?

If you attempt to upgrade your Windows 10 via Windows Update option, then there is a chance that you encounter an error code stating 0x80070422. The error code hinders the users from downloading the latest updates, and the blog will help you fix it easily:

Check the Service of Windows Update

If the users are trying to check the service of Windows Update, then they should carefully apply the given steps.

  • Open Control Panel and select the Administrative Tools.
  • Now, locate and perform the Services.
  • After you launch the Services screen, locate the Windows Update and twice click on it to launch the Properties.
  • Navigate to the ‘Windows Update Properties’, locate Startup’s Type within the drop-down.
  • You should click on Automatic.
  • Then look at Service status and whether the status is not adjusted to Running select the Start option in that field to begin it.
  • Now, select the OK button to apply the settings and reboot the system.

Turn off IPv6 

If the users are trying to turn off IPv6, then they should carefully apply the given steps.

  • Go to the Control Panel and launch it on your system.
  • After that, click on ‘Network and Sharing Center.’
  • Navigate to the items list and locate ‘ (TCP/IPv6)’ then untick it.
  • Select the OK button to apply the changes.
  • Now, reboot the system and check whether the error is fixed.

Turn off Ipv6 via Registry Editor

If the users are trying to turn off IPv6 via registry editor, then they should carefully apply the given steps.

  • Go to the Windows Search on your system.
  • After that, input ‘regedit’ into it and hit Enter to launch the Registry Editor.
  • Go to the pursuing path: ‘HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\TCPIP6\Parameters’.
  • Navigate to the Parameters and right-click on it on the left-hand side panel.
  • Then click on New option and then choose DWORD (32-bit) Value.
  • Reach the field of name and input ‘DisabledComponents’ into it and hit Enter.
  • You have to select the fresh ‘DisabledComponents value then click on the Modify option.
  • Then input ‘’ffffff’ as Value data and hit OK to apply the changes.
  • You should shut the Registry Editor then reboot the system.
  • Now, if you would like to turn on IPv6, then go to the exact button as in instruction 2 and modify the DisabledComponents value to 0 or remove the button of DisabledComponents.

Look at EnableFeaturedSoftware Data

If the users are trying to look at EnableFeaturedSoftware Data, then they should carefully apply the given steps.

  • Navigate to the Windows logo on your system.
  • After that, input ‘regedit’ into it and hit Enter to open the Registry Editor.
  • Then find the pursuing path: ‘HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\ Windows Update\Auto Update.’
  • Now, look at the ‘EnableFeaturedSoftware Data’ and remember that it values it to adjust to 1.

Reboot Network List Service

If the users are trying to reboot network list services, then they should carefully apply the given steps.

  • Reach the Start menu on your system.
  • Thereafter, input ‘run’ into it and hit Enter to open the Run section.
  • You should input ‘services.ms’ into it and hit Enter to open the Windows Services.
  • Then find the Network List Service and right-click on it.
  • Go to the Restart option and click on it.
  • You should also click on the Stop button and choose Restart.
  • Now, attempt to upgrade the system once more to check whether the error continues.

Perform Windows 10 Update Troubleshooter

If the users are trying to perform Windows 10 update troubleshooter, then they should carefully apply the given steps.

  • Navigate to the Start logo on your system.
  • After that, click on Update and Security.
  • Go to the Troubleshoot option.
  • Reach the Windows Update and click on it then run the troubleshooter.

Source  :-  https://lunorton.com/how-to-fix-0x80070422-windows-10-update-error/

HOW TO FIX DISTORTED SOUND ON WINDOWS 10?

If you are planning to upgrade your Window to Windows 10, then you must read this article to avoid any mishaps. Most Windows 10 users have complained that there is some issue in Windows 10 like Static, lacklustre quality and distortion, etc. So, before upgrading, check the solutions of this error.

Install the Drivers Again

  • Go to the Windows logo and right-click on it within your system.
  • Then, click on the Device Manager.
  • You should click on the ‘Sound, video, and game controllers.’
  • Navigate to Sound device and right-click on it then launch the Properties.
  • You have to select the Details section.
  • Reach the menu of drop-down and select the HardwareId.
  • Go to the driver’s signature first value and copy it, then paste it into the web browser of the option and google it.
  • Later, launch the official website, then reach the parallel sound driver and download it.
  • Now, reboot the system.

Upgrade the Drivers

  • Go to the Start menu and right-click on it on your system.
  • After that, click on the Device Manager.
  • You should move down to the option of ‘Sound, video, and game controllers.’
  • Reach the Sound device, and right-click on it, then click on the Uninstall device option.
  • Once finish the install process, reboot the system.
  • You should launch the Device Manager once more.
  • Go to the button of ‘Scan for hardware changes.’
  • Then Windows can install new sound drivers automatically.
  • Now, reboot the system once more and check for improvements.

Launch Windows Audio Troubleshooter

  • If the users are trying to launch Windows Audio Troubleshooter, then they should carefully apply the given steps.
  • First of all, launch the Start and select the ‘cog-like’ button to launch the Settings application.
  • After that, click on the Update and Security option.
  • You should choose the Troubleshoot within the left-hand side panel.
  • Go to the option of Playing Audio to extend it.
  • Now, select the option of ‘Run the troubleshooter.’

Turn off Allow Apps

  • Reach the Sound button from the notification section.
  • Then launch the Playback devices.
  • You should click on the Advanced section.
  • Beneath the tab of ‘Exclusive mode,’ untick the box of ‘Allow applications to take exclusive control of this device’ to turn it off.
  • Now, apply modifications and check for improvements of sound.

Turn off Sound Effects for Standard Playback Device 

  • Select the Sound button and right-click on it within the notification section.
  • After that, launch the Playback devices.
  • Reach the standard Playback device and right-click on it.
  • You should launch the Properties option.
  • Launch the Enhancements section.
  • Now, tick the box of ‘Disable all sound effects’ and verify changes.

Modify the Standard Sound Format on the System

  • You should reach the sound button and right-click on it once more.
  • Then launch the Playback devices.
  • Go to the Advanced section.
  • Now, move to the ‘between different formats’ and select the Test option and check for improvements.

Restore Windows 10

  • Make sure that to backup your essential data on cloud storage or optional partition.
  • After doing that, hold the Windows, and I buttons altogether within your keyboard to launch the Settings application.
  • You should click on the Update and Security tab.
  • Then click on the Recovery option from the left-hand side panel.
  • Select Get Started beneath the ‘Reset this PC’ tab.
  • You have to select the Remove everything then selects the Next option.
  • Now, once you finish the process, the sound problems can be gone.

Source  :-  https://rawebroot.com/how-to-fix-distorted-sound-on-windows-10/

HOW TO HIDE GAMES ON PS4?

The library of gamers is generally very messy because of a number of games on it. When you purchase and play games in PS4 titles, then there are times you would like to hide their titles. If you are wishing to do so, then we will tell you how to hide your games on PS4.

Hide Games in Game Library

If the users are attempting to hide games in the game library, then they should correctly employ the given instructions.

  1. First of all, switch on the PS4, and you have to wait for load the Dashboard.
  2. After that, reach the dashboard and move over to the Library.
  3. You should get into the Library and reach the Purchased option to view each game you have bought on account of PSN.
  4. Navigate to the game you would like to hide within this menu.
  5. You have to hold the Options button o the controller of PS4.
  6. Then locate the ‘Do Not Show Content Item in (Purchased)’ option and select it.

Disclose Hidden Library Games

If you would like to disclose the hidden library games, then you can determine to pursue the directions given below.

  1. Get back to the Library option.
  2. After that, hit the Options button on the controller.
  3. Now, you should click on the ‘Check Hidden Content Items’.
  4. Then you have to wait for PC to procedure the request, and you will view each of the hidden game once again.

Hide Games in the Activity Feed

If the users are attempting to hide games in the activity feed, then they should correctly employ the given instructions.

  1. Navigate to the menu of Profile on your device.
  2. Thereafter, click on the Games option.
  3. Go to the list and select any game.
  4. You should pick the Options button on the controller.
  5. Then select the ‘Hidden Games Settings’ option.
  6. You will see a new screen will prompt.
  7. Later, choose the ‘Hidden Games for PS4’ option.
  8. Now, reach all the games that you would like to hide from the activity feed.

Hide Activity Log Using an Alternative Process

  1. You should change the activity feed through the PS4 privacy settings.
  2. If you would like to reach the Privacy settings, then go to the option of Settings at the upper right-hand side of the PS4 dashboard.
  3. Now, the toolbox button shows the menu of Settings.
  4. After getting into the Settings, then move until you locate the option to enter the Privacy Settings.
  5. If you want to customize the settings, then you must input the account password once again.
  6. On the menu of Privacy Settings, move down until you view the option of Hidden Games.
  7. Once you choose it, this will reach you return to the activity feed.
  8. Now, you can select the game you want to hide from the activity feed.

Disclose Hidden Activity Feed Games

If you would like to disclose the hidden activity feed games, then you can determine to pursue the directions given below.

  • Firstly, you should enter the menu of Hidden Games.
  • Then you should use either of the two processes earlier described in this blog.
  • After that, untick each game you would like to disclose.
  • Now, verify the changes.

Source  :-  https://vmsoffice.com/how-to-hide-games-on-ps4/

How to Recover Windows 10 after a Malware Infection?

Malware is a serious issue, especially in Windows 10. There are several types of malware, like adware, spyware, Trojan, and virus, etc. It will damage your essential data and system. So, if you are interested to know how to protect your Windows 10 PC from malware, then here are some instructions given below.

Access Safe Mode

If the users are attempting to access safe mode, then they should correctly employ the given instructions.

  1. Go to the Start key on your system.
  2. After that, select the power option and press the Shift button over the keyboard.
  3. Then reach the menu and select the Restart option.
  4. You will see a full-screen menu, select the Troubleshooting option.
  5. Thereafter, click on the Advanced Options and then choose Startup Settings.
  6. Finally, select the button of Restart.
  7. Now, once you reboot the system, the options list will appear.
  8. Thereafter, choose Safe Mode by holding the parallel button.

Remove Temporary Files

If you would like to remove the temporary files, then you can determine to pursue the directions given below.

  1. You should hold the Windows and S buttons altogether over the keyboard to invoke the search section.
  2. After that, input ‘disk cleanup’ into it and select the OK button.
  3. Then reach the results and pick the Disk Cleanup.
  4. You require to choose the drive that you would like to Cleanup.
  5. Thereafter, you have to wait for some time during the Disk Cleanup scans the chosen drive.
  6. Go to the file type that you would like to delete.
  7. Later, select the OK button and then choose the button of Delete Files.
  8. Now, wait for a moment during the Disk Cleanup deletes the chosen files.

Check the Web Browser

If the users are attempting to check the web browser, then they should correctly employ the given instructions.

  1. Go to the menu and select the Settings option.
  2. Thereafter, click on the button of ‘Manage search engines’ into the Search field.
  3. Then you will see an applicable search engine list. Ensure that to choose the preferred search engines and set as default.
  4. Once you have done, reboot the web browser and look at whether the issue is fixed or not.

Delete Suspicious or Unknown Extensions

If you would like to delete suspicious or unknown extensions, then you can determine to pursue the directions given below.

  1. You should select the Menu option and pick the More Tools option.
  2. After that, reach the Extensions within the list.
  3. Now, you will see an installed extensions list and find them any doubtful extensions then choose the button of Remove beside them to remove them from the system.
  4. Finally, once you remove the doubtful extensions, reboot the web browser and look at whether the issue fixed or not.

Source  :-   https://lunorton.com/how-to-recover-windows-10-after-a-malware-infection/

HOW TO DOWNLOAD IOS 13.4.5 PUBLIC BETA 1 INTO YOUR IPHONE

iOS 13.4.5  Public beta 1 version on the way with some new features that need a third-party installation in your device. Apple released iOS 13.4.5 Public beta 1 version software first for their engineers who can use, identify any issue with these updates and fix them.

New in Version 13.4.5

On April 16, 2020, Apple has released iOS 13.4.5 Public beta 1 version. Here are the steps on how to can download and install the iOS 13.4.5 Public beta 1 version on your Apple device.

  • How to create a backup of the iPhone
  • How to install iOS 13.4.5 Public beta 1 via iTunes
  • How to install iOS 13.4.5 Public beta 1 via a Profile
  • How to start iOS 13.4.5 Public beta 1

1) How to Create a Backup of the iPhone

Before starting downloading and installing a new iOS 13.4.5 Public beta 1 into your iPhone, we recommend you take a backup of your device. It is an excellent idea when you keep a backup of your device as monthly weekly or daily. Backup is one of the most important portions for the user; it can save you personal data files, photos, and videos, etc. secure to lost. You can also view and use your important data files documents images and videos in another device by entering your email details.

Here are the steps on how to create a backup of your account:

  1. Attach your iPhone with your Windows computer or Macbook.
  2. Start iTunes.
  3. Tap ob the iPhone logo that appears into the menu section.
  4. Here you need to sure that your backup is settings as “This Computer” (or it was the best option when you enabled “Encrypted backup”).
  5. Hit “back Up Now” (tap on “Encrypt Back” and need to attach a password to secure your backup).
  6. Tap on “Back up Application, if you’re asked.
  7. Hit “Command” to launch Preference. (Or visit top the iTunes option and tap on “Preference”).
  8. Hit the “Device” option.
  9. Control-tap on the “Backup” and then select “Archive.”

After this above process archiving will secure your backup and overwrite your backup for further use. You can recover it whenever you want into your iPhone or another iPhone or device where you wish to recover.

2) How to Install iOS 13.4.5 Public beta 1 via iTunes

Here are the steps on how to install iOS 13.4.5 Public beta 1 via iTunes:

  1. Visit apple.com into MacBook.
  2. Hit on “Discover” option.
  3. Hit on “Operating system option” that appears on the upper side of your screen.
  4. Hit “Download.”
  5. Log in to your ‘s account with a user ID and password.
  6. Visit iOS 13.4.5 Public beta 1 section and then tap on “Download Restore Picture.”
  7. Tap on “iOS restore picture” that is similar to the device that you wish to download and install into your device.
  8. Hit the “Application” option near the “Xcode 11” here, and you need to wait until the downloading complete.
  9. Launch iTunes in the Application folder or Dock.
  10. Attach your iPhone with your Macbook.
  11. Hit the “iPhone” logo that popup in iTunes. Here you might be prompted to put your Device password on your iPhone.
  12. Now grip down the “button” on your Mac Book’s keyboard, and then tap on “Check for Updates.”
  13. Tap on “Download” that appears into sidebar, or the location where you have downloaded iOS 13.4.5 Public beta 1 restore Image.
  14. Tap on “iOS 13.4.5 restore the image.”
  15. Hit “Open.”

After this above process, iTunes will download and install 13.4.5 Public beta 1 version on your device; this process can take few minutes, so you need to wait until the process complete.

3) How to Install iOS 13.4.5 Public beta 1 via a Profile

Here are the steps on how to install iOS 13.4.5 Public beta 1 via a Profile:

Here are the steps on how to install iOS 13.4.5 Public beta 1 via iTunes:

  1. Visit .apple.com into MacBook.
  2. Hit on “Discover” option.
  3. Hit on “Operating system option” that appears on the upper top of your screen.
  4. Hit “Download.”
  5. Log in your ‘s account with user ID and password.
  6. Visit iOS 13.4.5 Public beta 1 option and then tap on “Download.” It will launch the command of downloading and installing the iOS 13.4.5 Public beta 1 software profile on iPhone.
  7. Hit “Close.”
  8. Launch “Settings.”
  9. Click “Profile Download.”
  10. Hit “Install.” (Here you have to put your password).
  11. Agree to permission and then tap on the “Install” button that appears on the top right side and once in the lower right corner on your screen.
  12. Hit “Restart” to change apply that you have changed on your device.

Here are the steps to install Public beta 1 by itself through the system preference:

  1. Start “Settings” on the Home Screen, hit “general,” and then hit on the “Software Updates.’
  2. When the updates popup on your screen, hit the “Download and Install.’
  3. Put your “Password.”
  4. Hit “Agree on the T&C.
  5. Hit “Agree” to confirm to T&C again.

After this above process, you need to reboot your device to install iOS 13.4.5 Public beta 1 version on your device, it will take a few minutes, and you need to wait until the process complete.

4) How to Start iOS 13.4.5 Public beta 1

When your device reboots to install iOS 13.4.5, there is a little process that you need to do into your device.

  1. Here are the steps on how starts iOS 13.4.5 Public beta 1:
  2. Hit “Continue.”
  3. Put your password; iCloud set up will update in minutes.
  4. Hit “Get Started.”
  5. When the above process is finished, you can run the updates version on your device.

Source  :-  https://rawebroot.com/how-to-download-ios-13-4-5-public-beta-1-into-your-iphone/

HOW TO FIX UNABLE TO START THE BLUETOOTH STACK SERVICE

When you have updated your Windows operating system, then you may face several issues like unable to start stack service or Bluetooth. This error is occurring when Bluetooth control driver malfunctions and the notification will be displayed on your device screen when you want to connect your Bluetooth enabled device.

There are lots of users who complained that they get the same error in their Microsoft community environment. If you are facing this issue, then this article will be beneficial to you. In this article, we will discuss how you can solve the problem Unable to Start the Bluetooth Stack Service.

How to Solve Unable to Start the Bluetooth Stack Service

In this article we have mention four methods to fix the issue of Unable to Start the Bluetooth Stack Service in easy and convenient way:

  • Removing WIDCOMM Bluetooth Driver
  • Starting Bluetooth Support Service
  • Turn off Bttray from Startup
  • Updating Bluetooth Driver

1) Removing WIDCOMM Bluetooth Driver

Here are the steps on how to remove WIDCOMM Bluetooth Driver:

  1. Tap on “Start” icon and choose Settings.
  2. Visit the application.
  3. Tap on Apps and features.
  4. Find “WIDCOMM Bluetooth Driver” in the list appear on the screen.
  5. Tap on “WIDCOMM Bluetooth Driver” then choose “Remove.”
  6. Tap “Yes” to confirm your change.

2) Starting Bluetooth Support Service

Here are the steps on how to Starting Bluetooth Support Service:

  1. Tap Windows + R key to launch the “Run.”
  2. In the Run search field type “services.msc” and tap on “OK” to launch the service.
  3. In the “Service” page, find the “Bluetooth Support Service.
  4. Right-tap on “Bluetooth Support Service” then chooses “Properties.”
  5. When the “service” is performing, then tap on “Stop.”
  6. Tap on the drop-down menu to Startup Type and then choose “Automatically.”
  7. Tap on the “Start” option to launch the service reputed.
  8. Choose Apply and the Tao “OK” to save your change.

Alternatively, you are still facing this issue, and then you need to follow another troubleshoot and restarting your Bluetooth support service. Here are the steps to follow:

  1. Launch the Service.
  2. In the “Service” screen, find the complete service with your Bluetooth in it.
  3. Double-tap on the service and tap “Stop” and remember to Startup is set as automatically.
  4. Tap the Start option again and then tap “OK” to save your changes.
  5. Here you need to repeat the process that you have done with your Bluetooth related service.
  6. Now close the entire service and then check the issue is resolved.

3) Turn off Bttray from Startup

Here are the steps on how to turn off Bttray from Startup:

  1. Right-tap on the “Taskbar” tab, then choose “Taskbar Manager.”
  2. When Taskbar manager appears on your screen, launch the “Startup” option.
  3. Find the Bluetooth device or bttray button in the startup application list.
  4. Choose bttray and then tap on “Disable.” This is preventing your application from launching while Startup.
  5. Now you need to close Task Manager then check the issue is resolved.

4) Updating Bluetooth Driver

Here are the steps on how to updating Bluetooth driver:

  1. Tap Windows + R key on your keyboard to launch the Run administration.
  2. In the run search field, enter “devmgmt.msc” then tap “OK” to launch the Device Manager.
  3. When the device manager appears on your screen, then you need to enable the Bluetooth category.
  4. Right-tap on your PC Bluetooth device then chooses “Update Driver.
  5. To updates, driver software chooses the search automatically option.
  6. Here you need to wait until the download and install pending updates of your Bluetooth device.
  7. When the installation finished, you need to restart your device and then check if the issue is resolved.

Source  :- https://vmsoffice.com/how-to-fix-unable-to-start-the-bluetooth-stack-service/

How to fix Error Driver PNP Watchdog

If you see Blue Screen of Death (BSOD) along with error “Drive PNP Watchdog,” then the issue needs to be fixed ASAP. Several Windows users reported them getting error Driver PNP Watchdog at the time of installing Windows 10 updates. In this process of updating your Windows 10 operating system, the updates freeze and the BSOD appears. In this article, we will show you how you can fix Driver PNP Watchdog for a Good error issue from your Windows 10 operating system.

How to Fix Error Driver PNP Watchdog for Good

In this article, we have mentioned five ways to fix Driver PNP Watchdog for Good error issue from your Windows 10 operating system is straightforward and convenient methods for the user:

  • Repair Computer Registry
  • Run CHKDSK
  • Using CCleaner
  • Rerun Windows Update
  • Reset this PC

1) Repair Computer Registry

  1. Visit Start and then enter “cmd.”
  2. Right-tap on the command prompt and then choose Run as Administrator.
  3. Here you need to enter “sfc” in the command prompt field.
  4. Here you need to wait until the scanning process is finished, and then you need to restart your PC. After this Process all the corrupted files will be changed with through reboot.

Additionally, you can also run an SFC scan and use DISM to fix the error driver PNP watchdog for a good problem. Here are the steps on how to run the SFC scan:

  1. Tap Windows + x key on your keyboard to launch the command prompt.
  2. In the command prompt search filed to need to enter the given command:
  3. exe /Online /Cleanup-image /Restorehealth
  4. In this case, DISM doesn’t find online, and you need to try installing a DVD or USB. Insert the media and then enter the given command in the search field:
  5. DISM.exe /Online /Cleanup-Image /RestoreHealth /Source:C:RepairSourceWindows /LimitAccess
  6. And remember to replace “C: RepairSourceWindows” path with your US or DVD.

2) Run CHKDSK

Here are the steps on how to run chkdsk to error driver PNP watchdog for good on windows 10:

  1. Launch the command prompt by tapping Windows + R key to run as administrator.
  2. Here you need to enter “CHKDSK C: /F” in the command prompt and sure to replace “W” with the correct number to present device partition.
  3. By default, it is “C” and mainly different while your launched command prompt.
  4. Chkdsk scan may take 20 minutes or more that is depending on your device partition, and remember one this while scanning does not interrupt it.
  5. When the scan completes, you need to restart your computer.

3) Using CCleaner

  1. First, you need to download and install a free version of CCleaner, or you can also download and install the Pro version of CCleaner.
  2. You have to follow the prompts to finish the installation.
  3. When the installation is finished, you need to launch the CCleaner and then hit the “Analyze” button.
  4. When the CCleaner has completed scanning, you need to tap on “Run Cleaner” and then follow the on-screen instruction to finish the Process.
  5. After the above Process, you need to restart your device then check the issue is resolved.

4) Rerun Windows Update

  1. Visit Start and then enter “Settings” to launch the Settings app.
  2. Navigate to the Updates and Security tab.
  3. In the Windows updates tab, you need to check any updates available, if yes, then install on your device.

5) Reset this PC

  1. Power off your Computer until the “Advanced Recovery environment” popup on your screen.
  2. Select the “Advance option.”
  3. Now choose “Troubleshoot.”
  4. Tap “Restart this PC.”
  5. Here you need to choose what you want to delete or keep.
  6. Tap “Reset” to continue.

Source  :-   https://lunorton.com/how-to-fix-error-driver-pnp-watchdog/

ANIMAL CROSSING: NEW HORIZONS: HOW TO REGISTER MUSIC TRACKS

K.K. Slider in Animal Crossing: New Horizons is a guitar character. This new guitar character has shaped the game into some interesting. The music event on the island is completely performed by K.K. Slider that plays its own songs and also the requested songs by villagers. In the live performance of K.K Sliver, he performs several songs, but if the player wants to listen to any preferred song, so they can convince K.K. to do it. However, the songs K.K. Slider performs, players can play them when they want in their home, but to do that, players need to register them. Unfortunately, in the game, there is no guide available to use these songs to play, so here is the quick guide to register songs in Animal Crossing: New Horizons.

How to Register Songs in Animal Crossing: New Horizons

Registering tracks into the music devices is an easy process, but before doing that, players have to purchase the tracks they love or need for any other reason. Nook Shopping app access thorough Nook Shop at Resident Services building that always has one song of K.K Slider. The songs in the shop change on a daily basis, so in order to get more songs, players have to check the shop daily for updated tracks.

There is a great feature in the Nook Shopping that it has a default system that allows the user to send any item directly to their friend without the requirement of email or letter. The player should inform their friends to check for the song in the Nook Shop and send it if they find any preferred song. From this process, players will able to find songs faster for registration.

There are numerous songs that players can find through Nook Shopping, but there are also a few songs that cannot be brought. These songs “Animal City,” “Farewell,” and “Drivin” all needed to be requested at the time of K.K. Slider on the island. If the player request K.K to give the songs that he perform, so he will send them through the mailbox to the player.

After having all desired tracks on the list, players can easily register them to playing devices in the home. Finishing the registering tracks will remove the songs from the inventory and will add them to the device for playing those songs. The list of songs will automatically start to play when the player enters the room. If there are multiple songs available in the device, then every song will be added in the query for playing next without stopping. K.K Slider will play a major role in getting and registering the songs because, without the help of K.K., it is impossible to get every song of the game. However, in the Nook Shop, the list of songs will refresh every day, and the player can purchase one song on a daily basis if they don’t have that particular song.

Source  :-  https://elinajohn01.blogspot.com/2020/04/animal-crossing-new-horizons-how-to.html